- Total $0.00
Diamonds Direct on-site master jewellers and repair specialists have over thirty years of experience in Kerikeri, servicing the community with the very best quality repair, adjustments, restoration, diamond setting, and more. We combine old techniques and skills with the latest technology to provide the very best in jewellery repair and maintenance. Our quality of work is unequaled. If you want the best then look no further. There is not much we haven’t seen before or cannot repair. Free quotes for all work. All our work comes with a one year guarantee.
We can size your ring larger or smaller to fit your finger perfectly. We will ensure your ring is the perfect fit and that it slides comfortably, yet firmly, over your finger. Regardless of the ring being sized up or down we will do a seamless re-size.
When a ring size is altered it can loosen the stones in the setting. As part of our work we will check and tighten all of your gemstones to ensure their safety. If your ring is white gold we will include rhodium plating to give your ring a brand new shine.
If the ring is going up in size we insert a new section to make it larger. If the ring has engraving we will repeat the pattern to make the sizing as invisible as possible. We will also ensure if there is an engraved message inside we will cause the minimum disruption to it, if any at all.
Many maintenance and repair needs come under the term Ring Repairs. Other than the maintenance required on settings there is a host of other jobs we undertake. Our standard of workmanship is unequaled. We undertake repairs that other jewellers won’t or can’t do. All jewellery repair work is guaranteed for one year.
Maintaining the claws on your rings is a must. if you don’t have your claws regularly checked they could have been knocked out of line or worn so thin that your diamonds will simply fall out. Many insurance companies require you to have your claws checked regularly. We will check your claws for no charge. We recommend having this done every twelve months.
Replacing missing claws and re-tipping claws – Quite simply if you wear your ring, the claws holding the stones in place can get worn. If your claws are worn we will strengthen old ones by re-tipping the claws or replacing the claw completely if this deems necessary for the security of your gemstone.
Don’t take the risk of losing a precious gem. Come in now for your free check.
A Ring Maintenance Warranty is exclusive to Fishers Jewellers. Many insurance companies these days insist on the insured having their diamond ring checked by a jeweller regularly so as not to lose the diamond and need to make a claim.
We are one step ahead and we provide this service absolutely free.
You don’t need an appointment, just bring your jewellery in asking for a Ring Maintenance Warranty. Depending on our workload we may need it longer than a day. Please let us know your schedule and we’ll accommodate wherever possible.
The solution to arthritic or swollen knuckles and the annoyance of not being able to wear firm fitting rings. Finally a practical solution. CLIQ is an innovative system we can install in your ring so you can once again enjoy wearing them. Watch the video on the right or click here to learn more
Occasionally you may lose a stone out of your ring, whether by a knock, worn claws, accident or other. We can colour match a replacement stone for you and repair the settings as required. This quite often can be an insurance claim.
We can provide a quote to replace for your insurance company.This is also a good time if you have been considering changing the style of setting.
Some rings we see have poor design and the stones falling out is often no surprise to us. If this is the case we will advise you accordingly. We don’t want you spending money without an improvement if the result will be the same further down the track.
Well loved gemstones sometimes need re-vamp. Coloured gemstones do get scratched and chipped, and just don’t look their best anymore. We can re-polish those gems for you. It does involve removing them from their mounts, but usually the setting is at the stage where it also needs a re-build. This is the ideal time to do so.
Diamonds can get damaged too. We can re-cut diamonds and coloured gemstones so they will look new again. Depending on where they are damaged will influence the size they may have to be cut down to however. Sometimes a replacement stone may be the better option. Of course this may not me a suitable choice if the gem has significant sentimental value. We can provide you with the options and costs to help you make the best choice.
Some of this work may be able to claimed on your house contents insurance. We can provide insurance quotes if required.
We can revive your jewellery back to it’s original dazzle with our professional ring cleaning and polishing service. Gemstones require cleaning as dirt and grease gets stuck underneath the stone causing them to look dull and lifeless.
We have two levels of jewellery cleaning service.
Clean and Go – This is a no charge service we offer. It is a basic clean, usually we will clean your ring in our ultrasonic cleaner. This is sufficient if your ring is relatively new and still looking great but the gems and metal lack their usual sparkle. We don’t check security of stones nor do we tighten any.
Premium Clean & Polish – We will hand polish your jewellery. This will remove scratching and make your jewellery look like new again. If there is a build up of grime behind the stones, this will be removed. All gems are checked for security and tightened if required.
Replacing or re-building clasps/catches is one of the repairs neck chains and bracelets require. We can replace standard clasps usually cheaper than re-building or repairing the old one. If the clasp is more of a unique design we will endeavour to repair that one. If it is beyond repair we can usually make a replica if required.
Chain links break from time to time. Re-joins is a straight forward repair.
Sometimes well loved chains will show more wear at the end links and cap ends. We can re-build those so you can continue to enjoy your chain.
Don’t take the risk of fitting charms to bracelets without having the links soldered closed. We solder charms on bracelets, gold or silver.
We can supply larger jump rings if required. We also carry a small range of charms and order any as required. Great gift for grandchildren.
Adapting earrings from clip-ons to pierced or vice versa changing earrings to studs or drops.
Fitting screw-on threaded posts and scrolls for high value earrings
Swissbacks is another innovative design as an alternative to threaded posts. No backs required.
Watch the video on the right to learn more. Ask us for more information.
Re-shank refers to replacement of the band of the ring. Well loved ring’s bands eventually wear so thin that they become vulnerable, as well as dangerous, because they are so thin and sharp they can cut into the finger. Often wearing multiple rings on the same finger has a sandpaper effect as they wear against each other. Fear not, it is a repair we can do to successfully restore your ring as new and make it safe and comfortable to wear again. We can repeat the pattern as it used to be, whether that includes an engraving pattern on the outside or a message on the inside. If you find you can’t remove the ring from your finger we can help there too. We can painlessly cut the ring from your finger and re-size or re-shank it so that it is comfortable and safe to wear, and take off if necessary.
Some of our customers request us to also join multiple rings together as they are always worn that way. We can do that in such a way that they can be separated again if desired.
Rhodium is a precious metal used for electroplating white gold jewellery. If you feel your white gold jewellery looks dull and has lost it’s shine it probably needs to be rhodium plated again. Rhodium plating gives white gold jewellery a superb white shiny appearance and stops it tarnishing. We also rhodium plate white gold settings on yellow gold rings. This really makes the gemstones look super sparkly.
You may have found your rhodium plating has not lasted for very long. Some manufacturers and workshops only do the minimum plating. You can’t tell how thick the plating is just by looking at it. We make sure to give your rings a really heavy plating so that it lasts several years.
The last thing you need is to be on the dancefloor at a wedding and find out you should have had your pearls re-threaded, as your precious pearls scatter across the floor. Of course this horror story is a scenario nobody needs.
Pearls require re-threading from time to time as the silk gets a little tired, frayed and stretched. Moisture, sweat and perfumes are absorbed into the silk and your pearl strand needs some love and attention.
Bring them to us and we can help. If the clasp needs adjustment or replacing a full re-thread is required then also. We provide a twelve month guarantee on necklace re-threading.
We undertake all engraving jewellery requirements. Although our engravers are off-site, they are highly competent and professional and the quality of their work is exceptional.
Engraving can fall under two general categories – “messages and names”, and “patterns and images”. We do both. Depending on your needs we will recommend either machine or hand engraving.
We can also show you some of the more ornate designs our hand engraver is capable of.
We carry and fit the best quality watch batteries. While we are there we check the battery cavity and clean any battery leakage, check the condition of seals, re-lubricate or replace if required. We work with precision and care on all brands including Rado, Rolex, Omega, Tag Heuer, Seiko, Citizen etc. We can also fit new batteries in all dive watches.
We carry quality leather ZRC French watch straps as well as a range of “well priced” straps. We can replace pins and springbars and can remove links from metal bracelet watches.
Often after a battery replacement a water pressure test is also necessary to ensure your watch is still up to it’s water resistance required for your needs. A dive watch is something you rely on for self preservation. You need to trust it will function under water. We can do a water pressure test while we fit your battery. We will also check the seals, re-lubricate or replace as necessary.